Do you want best table saw fences for your woodworking, then check these top 10 best table saw fences in this article.
Woodworking can be messy and difficult especially handeling and them the big wood pieces or plywood. Cutting them accurately and precisely can require lot of work and concentration. The big pieces of wood can be difficult to cut without any equipment.
For this we use table saw fence. In this there is a table with a saw blade on the table which can be adjusted up and down according to the type of cutting we need. Then there is a rip fence for table saw which helps in keeping the wood piece in line.
These best table saw fences are used to cut the boards and plywoods that are usually big around 12 inches and more. The blade can be adjusted up and down. The more up is the blade the deep it will give the cut.
The new table saw fence system has upgraded and become more easy to use. Before, instead of the blade which was fixed the table was adjusted up and down for the cutting which can be more time taking. But now you just need to adjust the blade according to the cut you want instead of adjusting the whole table.
The incra table saw fence with the incra tools is the one which is most prefered by many. So, we have also included that in our list.
You can check our list of top 10 best table saw fences below which we have mentioned for you.
Top 10 TABLE SAW FENCES Comparison Table
10 Best Table Saw Fences
1. Vega U26 -table saw fence 36-Inch Fence Bar, 26-Inch to Right
Vega U26 Key Features
- Table saw fence system fits a variety of saws
- 36-Inch fence bar (26 inches to right, 8 inches to left of blade); micro adjustment and auxiliary table support
- Steel construction; assembly required
- Table saw fence system; saw not included
- 34 pounds
2. Incra MITER3000SE -Miter Gauge with 27-Inch-49-Inch Telescoping Fence
Incra MITER3000SE Key Features
- Continuing its well respected tradition of “making accuracy easy”
- This model features INCRA’s exclusive AngleLOCK Indexed Positioning that locks in miter fence angles
- Features INCRA’s Incremental “Flip” ShopStop Positioner
- 364 laser cut V-stops for extreme accuracy at all angles Patented GlideLOCK Miter Bar with 8 expansion points
- 27″-49″ telescoping incremental miter fence
- INCRA Flip Shop Stop fence positioner Engraved stainless steel primary scale
2. DELTA BC30 -30 Inch Commercial Biesemeyer Table Saw Fence
DELTA BC30 Key Features
- Make sure this fits by entering your model number
- Includes 42-inch fence and rails for 30-inch right and 12-inch left of blade cutting capacity (78-200 and 78-130)
- Three point locking system and hairline pointer is accurate to within 1/64 of an inch
- Steel tape is built in eliminating the need for hand-held tape
- Fence body glides smoothly
- Finland birch construction
3. Incra WONDERFENCE37 -Wonder Fence Router Table Fence
Incra WONDERFENCE37 Key Features
- Heavy-duty, one-fence solution for all of your router table operations
- Produces perfect box joints and dovetails in all styles
- Includes a hi-rise 4 1/2-inch fence cap for vertical panel raising and tall boards
- Includes Incra TS-III table saw fence
- All critical surfaces machined are perfectly flat
4. HTC 2677 -Extension Table Leg Supports For Table Saws
HTC 2677 Key Features
- Legs support a table extension for a micro adjust router
- Designed to fit several other fence systems as well
- For an extension table for the HTC table saw and Router Precision multi-fence system
5. HTC HTC800 -Contractor Multi-Fence System
HTC HTC800 Key Features
- Fully adjustable for square, parallelism, and clamping pressure
- High-tech molded steel cam and clamping mechanism
- Heavy duty micro-adjust saddle and clamp angle for dependability
- Exclusive quick change fence faces
- Use with Xacta, Accufence, and Beisemeyer Home Shop Systems
6. DELTA U30 30 -Inch Table Saw Unifence
DELTA U30 30 Key Features
- 30-inch unifence saw guide with a durable 2-position fence face
- Anodized aluminum extrusions offer long lasting durability
- Secure 3-point locking system
- Hairline pointer with built-in steel tape for measurements to within 1/64-inch
- Includes carriage assembly, front guide bar, table frame, legs, shelf support brackets, and mounting hardware
7. Incra TSIII -Ultra Based Table Saw Fence Positioner (Sawtooth Rack Based)
INCRA TSlll Key Features
- Table saw fence positioner (sawtooth rack based); for most all standard 10-inch table saws
- 36-inch heavy-duty rip fence stays parallel at all positions; 32-inch right, 16-inch left positioning range
- Steel and aluminum construction
- Includes fence, mounting hardware, and manual
- Limited lifetime warranty
8. Biesemeyer 78-931 -For Table Saws
Biesemeyer 78-931 Key Features
- Predrilled to fit a variety of table saws
- 40-inch right, 12-inch left capacity for a variety of applications
- Hairline pointer allows easy, precise reading of distance
- 3-point locking system for parallel alignment to blade to 1/64-inch
- Built in tape for easy set up
9. DELTA 78-200 -Table Saw Fence Only (Rails Required), White
DELTA 78-200 Key Features
- 42-inch Fence with One Pair of Steel Support Legs
- Gray
- Versatile ripping capabilities to the right or left
- Measures 42 inches long and 2-1/2 inches tall
- Includes table saw fence system (rails required)
10. Incra LS17WFNCSYS 17 -For Router Tables, Band Saws & Drill Presses
Incra LS17WFNCSYS Key Features
- Movable fence for router table, drill press, or band saw
- Includes the Wonder Fence, the leading split fence design, the Wonder Fence
- Adds precision for serious joinery and woodworking fans
- Designed to meet the needs of serious woodworkers and beginners alike
- Provides versatility for a variety of tasks
Buyers Guide For Best Table Saw Fences
Table saw fences are one of the important equipment for you if you do woodworking and work with large wood pieces. So, choosing the right and best table saw fences for you is important.
To help you we have made this buyers guide and mentioning down some factors which you might find helpful in choosing the better one for you.
1. Check the rip fence and its positioning. The fence is the thing that keeps the wood piece that need to be cut parallel to the blade. So, check the measuements and its positioning accurately.
2. Look for the long durability of the table saw fence and the blade. Make sure that the material of the table saw fence is good and long lasts. Also the blade should be sharp and durable enough so that you can work with it in long time.
3. If you are beginner then go for the less complicated one and that is easy to use. It have movable fence and have a blade that works well.
So, these are some factors that you should keep in mind before selecting the best table saw fences for you.
Get Your Best Table Saw Fences
We have mentioned top 10 best table saw fences for you so that you have your woodworking easy, precise and accurate.
We have mentioned buyers guide in case you might need help to choose for you. You can definitely check this.
Now, you must be thinking that miter saw and table saw are same. But there is a big difference between them. The miter saw is used to cut short pieces which are less than 12 inches and have to cut in straight, curve or other shapes. But the table saw mostly gives straight and deep cuts that are large wood pieces.
We hope that this article will help you in getting the best table saw fences for you. So, go and get your best table saw fences.